Push in Fitting for AKRT

Push-in Fitting with blue press connect collar and exposed threads. Part shown on white background.
Push-in Fitting with blue press connect collar and exposed threads. Part shown on white background.
Push-in Fitting with blue press connect collar and exposed threads. Part shown on white background.

This fitting is used to connect tubing to the Rinse Tunnel Water/Air Control Assembly. It threads onto the ON/OFF valve.

This fitting is used to connect tubing to the Rinse Tunnel Water/Air Control Assembly.

It threads onto the ON/OFF valve.

Specs:

  • Design: Straight design
  • Structural design: Push-pull principle
  • Operating pressure for entire temperature range: -13.775 psi … 87 psi
  • Operating medium: Compressed air as per ISO 8573-1:2010 [7:-:-] Water as per manufacturer’s declaration at www.festo.com
  • Nominal tightening torque: 7 Nm
  • Tolerance for nominal tightening torque: ± 20%
  • Pneumatic connection 1: Internal thread G1/8
  • Pneumatic connection 2: For pneumatic tubing with an outside diameter of 6 mm
  • Housing material: Brass, nickel-plated